工业热风炉在我们的日常生活中，主要是对动力进行提供的一款重要设备，而正确的操起是保证工业热风炉有效运行的必要因素，那么我们在操作工业热风炉之前，都有哪些需要准备的工作呢？又有哪些相关的检查工作呢？针对工业热风炉需要对其进行全面的检查，如果是重新启动，或者是新安装和检修后的工业热风炉来说，对其进行全面的检查是非常有必要的，主要是对热风炉的外部和内部进行检查，检查的项目包含的有阀门、挡板、锅体、安全的附件和仪表等。

In our daily life, the industrial hot stove is an important equipment to provide power, and the correct operation is the necessary factor to ensure the effective operation of the industrial hot stove. So what work should we prepare before operating the industrial hot stove? What related inspections are there? In view of the need for a comprehensive inspection of industrial hot stoves, if it is restarted or newly installed and repaired, it is necessary to carry out a comprehensive inspection of the industrial hot stoves, mainly for the external and internal inspection of the hot stoves. The inspection items include valves, baffles, pot bodies, etc. Safety accessories and instruments, etc. 而工业热风炉的内部受热面积，相关的燃烧系统，以及烟道和承压的部件等都需要进行详细的检查，保证工业热风炉的内部和外部都处于正常的状态，这样操作的过程中，才能保证工业热风炉不会出现故障，并保证其正常的运行。

The internal heating area, combustion system, flue and pressure components of industrial hot blast stove need to be inspected in detail to ensure that the internal and external of industrial hot blast stove are in a normal state. Only in this way can the industrial hot blast stove not fail and ensure its normal operation. That's ok.

为了预防工业热风炉在运行的时候因为高温而出现刚度的膨胀，在开启热风炉之前就应该对其进行提前上水，主要是为了降低热应力的提升，导致其出现迅速的膨胀，并出现水位偏高的现象；而且烘炉也是比较重要的，避免出现高温的烟气，导致其出现变形、破裂和爆炸等事故。

In order to prevent the stiffness expansion of industrial hot blast stoves due to high temperature in operation, it is necessary to water them in advance before the start of hot blast stoves, mainly in order to reduce the increase of thermal stress, resulting in rapid expansion and high water level; furthermore, baking is also important to avoid the expansion. The high temperature flue gas leads to deformation, rupture and explosion accidents.

将工业热风炉受热面进行除锈，清除工业热风炉表面的油迹和污垢，可以采用煮炉的凡是，将热风炉在整体的蒸汽品质上进行有效的提升；当所有的检查工作结束之后，开始对热风炉进行点火，保证温度缓慢持续的上升，促使热风炉可以在升温上比较均匀。

If the heating surface of industrial hot-blast stove is rusted and the oil and dirt on the surface of industrial hot-blast stove are removed, the hot-blast stove can be effectively upgraded in the overall steam quality by boiling stove. After all the inspection work is finished, the hot-blast stove is ignited to ensure that the temperature rises slowly and continuously to promote it. Hot blast stove can be more uniform in heating.

千万不可以出现工业热风炉突然升温的现象，避免对其造成爆裂；还需要对工业热风炉进行暖管，在完成点火之后，因为温度会不断的上升，预防其存在受热不均的现象，所以暖管是非常有必要的，避免造成工业热风炉的管道和阀门出现损坏。

There must be no sudden temperature rise in industrial hot stoves to avoid bursting; there is also a need to warm up the industrial hot stoves, after ignition, because the temperature will continue to rise, to prevent the phenomenon of uneven heating, so it is very necessary to warm up the pipes, to avoid causing industrial hot stoves pipes. Damage to valve and valve.