环氧地坪选择的种类繁多，为了有效控制建设成本和正确选择，建议顾客最好从以下几个因素入手： 一、机械性能要求 1. 耐磨性：环氧地坪在使用时会有哪些车辆行走； 2. 耐压性：环氧地坪在使用时会承受多大荷载； 3. 耐冲击性：冲击力是否会引起环氧地坪面剥离；

There are many kinds of epoxy floor, in order to effectively control the construction cost and correct choice, it is suggested that customers should start with the following factors: 1. mechanical performance requirements 1. wear resistance: when the floor is in use, which vehicles will walk; 2. pressure resistance: when the floor is in use, how much load will bear; 3. impact resistance: impact resistance: Whether the strike force will cause the peeling off of the terrace surface;

二、化学性能要求

Two. Chemical performance requirements 1. 耐酸碱性：使用时腐蚀性化学物质的种类及浓度。

1. acid and alkaline: the type and concentration of corrosive chemicals used.

2. 耐溶剂性：使用时溶剂类型及接触时间。

2. solvent resistance: solvent type and contact time.

三、楼层位置状况

Three. Floor location status

根据环氧地坪是在地下楼层还是地面楼层的位置，确定是否需要防潮处理或选择特殊防潮地坪？

Based on the location of the epoxy floor in the basement floor or the ground floor, is it necessary to determine the need for moisture-proof treatment or select a special moisture-proof floor?

四、基面状况

Four. Base level situation

1. 基层强度：一般要求抗压强度≥20Mpa

1. base strength: General requirements, compressive strength is greater than or equal to 20Mpa

2. 平整度：是否需要用环氧砂浆修补？

2. Flatness: is it necessary to repair with epoxy mortar?

3.地面施工前一般需要用自流平处理

3. self leveling is usually required before surface construction.

五、美观要求

Five, aesthetic requirements

1. 颜色要求：是否需要颜色划分区域？

1. color requirements: do you need a color division area?

2. 亮度要求：是选择哑光还是亮光？

2. brightness requirement: choose matte or bright?

3. 平整度要求：是否对地坪的平整度有要求？

3. flatness requirement: is there any requirement for the smoothness of the floor?

六、安全性要求

Six, safety requirements

如果环氧地坪处在油渍环境或坡道处，则需要选择防滑地坪；如果在加油站，油库等特殊场所需要选择防静电、防爆的。

If the epoxy floor is in an oil-stained environment or on a ramp, it is necessary to choose an anti-skid floor; if the gas station, oil depot and other special places need to choose anti-static, explosion-proof.